This cabinet features grand arched
top display areas complete with lighting, dentil molding
crown, beaded faceframes and solid alder doors with fabric
and metal grills. The cabinet houses a full surround sound
system including the sub-woofer. The equipment is actively
ventilated with an ATM system. The finish is a custom finish with glazed highlights
and light distressing.
This cabinet is the focal point of this upstairs
den/sitting room. It is fabricated using beech solids and veneers.
The components and center channel speaker are located behind
the metal grillwork. The finish is a custom stain made to match
the existing shutters.
This free-standing
home theater hutch is fabricated using alder solids and veneers.
We only had 60" of width to work with, so the design was a bit
of a challenge due to our client's desire to cover their plasma
with bi-fold pocket doors and keep the cabinet from encroaching
into the room. The cabinet is finished
with a custom antique glaze. (Click
here to see detailing)
This cabinet is over 13 feet wide and 8 feet
high yet the warmth of the natural cherry and multiple lighted
display areas embrace this room in gentle comfort. The face
frames and doors are detailed with a rosewood beading. This cabinet
was a joy for our team to work on.
The cabinet is recessed into the
wall about 9" which allows the sides and top to come into the
room only 6". The center portion which houses the components
steps out to allow enough depth for the components. The eight drawers
on either side store the client's media collection. The cabinet is fabricated with maple
solids and veneers and is finished with a multi-step glaze. (Click here
to see detailing)
This cabinet houses components
in two of the lower compartments and two media pull-outs behind
the third door. Boston micro speakers are behind
the grilled compartments. The cabinet was lightly
distressed which is highlighted by the custom glazed finish.
Fabricated with alder veneer
and solids, this family room entertainment cabinet features traditional
styling with fluted columns. The cabinet houses a 52" Samsung
DLP, components, sub-woofer, center channel speaker and media pull-outs.
The open area just below the arched face frame at the top is lighted with halogen
puck lights. The finish is a light stain with glazed highlights.
This cabinet is fabricated with maple veneers
and solids. The cabinet was finished with a glazed
stain and satin lacquer finish.
The cabinet on the right was fabricated
using alder solids and veneers with our "Cinnamon" satin
finish. Beautiful detail accents and custom storage for a 52"
Mitsubishi DLP, components, subwoofer and media make this cabinet
highly functional while being the center piece of this room.
This cabinet is fabricated with alder solids
and veneers and is finished with a tinted walnut stain with
glazed highlights. The cabinet features traditional styling
with solid raised panel doors and lighted display at the top
of the cabinet.
These cabinets were fabricated with paint grade
materials and finished with a faux process to compliment the
styling of the home. Both
cabinet feature lighted display areas at the top of the cabinet.
The home theater cabinet sits at an angle to optimize the viewing
of the 61"
