Home Theater Cabinets - Traditional Styling

"It has been a total pleasure working with you.
It's refreshing to know that there are still craftsman
like you and your team that take the time to do such great work."

Traditional Style Home Theater & Entertainment Furniture and Cabinetry

Go back to the Home Theater Gallery home


	We worked closely with our clients to create this beautiful home theater cabinet. The center piece of the family room, this piece brings warmth and specific function together in a traditional style. The cabinet features grand arched top display areas complete with lighting, dentil molding crown, beaded faceframes and solid alder doors with fabric and metal grills. The cabinet houses a full surround sound system including the sub-woofer. The equipment is actively ventilated with an ATM system. The finish is a custom finish with glazed highlights and light distressing.


		This cabinet is the focal point of this upstairs den/sitting room. It is fabricated using beech solids and veneers. The components and center channel speaker are located behind the metal grillwork. The finish is a custom stain made to match the existing shutters.


	This free-standing home theater hutch is fabricated using alder solids and veneers. We only had 60" of width to work with, so the design was a bit of a challenge due to our client's desire to cover their plasma with bi-fold pocket doors and keep the cabinet from encroaching into the room. The cabinet houses the components behind two of the doors in ATM cooled compartments. We installed 3 media pull-outs behind the third door. There is additional media storage in the small drawers on either side of the center channel speaker. The cabinet is finished with a custom antique glaze. (Click here to see detailing)


		The picture does not do justice to the beauty of this piece. This cabinet is over 13 feet wide and 8 feet high yet the warmth of the natural cherry and multiple lighted display areas embrace this room in gentle comfort. The face frames and doors are detailed with a rosewood beading. The cabinet houses all components, speakers including sub-woofer, a 50" plasma display and media storage for DVDs & CDs. This cabinet was a joy for our team to work on.


	The cabinet is recessed into the wall about 9" which allows the sides and top to come into the room only 6". The center portion which houses the components steps out to allow enough depth for the components. The eight drawers on either side store the client's media collection. The 42" Sony Plasma floats in the center of the cabinet and is hung on an articulating arm that allows access to the cable and venting chase that is located behind the TV. The cabinet is fabricated with maple solids and veneers and is finished with a multi-step glaze done by Old World Faux Finishing. (Click here to see detailing)


		Styling is on the simple side of Tuscan for this alder cabinet. The cabinet houses components in two of the lower compartments and two media pull-outs behind the third door. The TV is a 50" Hitachi DLP rear projection behind the removable TV panel. Boston micro speakers are behind the grilled compartments above the TV. The cabinet was lightly distressed which is highlighted by the custom glazed finish.


	Fabricated with alder veneer and solids, this family room entertainment cabinet features traditional styling with fluted columns. The cabinet houses a 52" Samsung DLP, components, sub-woofer, center channel speaker and media pull-outs. The open area just below the arched face frame at the top is lighted with halogen puck lights. The finish is a light stain with glazed highlights.


		This cabinet is fabricated with maple veneers and solids. The cabinet houses the main and center channel speakers in the grilled compartment above the Zenith 60" DLP TV. The components and media storage are behind the doors below. The objective with the styling of this piece was to match the existing fireplace mantle. The cabinet was finished with a glazed stain and satin lacquer finish.


	The cabinet on the right was fabricated using alder solids and veneers with our "Cinnamon" satin finish. Beautiful detail accents and custom storage for a 52" Mitsubishi DLP, components, subwoofer and media make this cabinet highly functional while being the center piece of this room.


		The painted home theater cabinet in this family room finishes off the alcoves that are typical to new construction in Southern California and matches the built-in cabinet that we built for the client. The components are housed in the cabinet located above the mantle. The rear projection TV and center channel speaker are covered with the removable panel below. The front and rear channel speakers are installed into the ceiling. (Click here to see a close-up of the detailing we used for this cabinetry.


	This home theater cabinet features solid alder wood and veneers with a clear finish. The cabinet is 10 feet wide and set into an alcove. The cabinet has three modules with the center module set forward 2 inches to give the piece more dimension. the cabinet houses a 50" plasma with 3 bays of component storage below. the narrow fronts to the outside cover two pull-out media storage bins. The sub-woofer is located in the cabinet at the lower right side on a sand filled base, isolated from the rest of the cabinet.


		This cabinet is fabricated with alder solids and veneers and is finished with a tinted walnut stain with glazed highlights. The cabinet features traditional styling with solid raised panel doors and lighted display at the top of the cabinet. The cabinet houses a Sony 70" XBR LCD rear projection TV. Components are stored below in a pull-out component rack. The cabinet also houses a sub-woofer, center channel speaker and media pull-outs.


	The cabinet and paneling was fabricated using maple solids and veneers. The cabinet was finished with a custom honey maple satin finish. The client had Old World Finishers finish the paneling to match the cabinet. The cabinet houses a 50" TV, with room to expand to a 60" in the future. The cabinet has two component compartments and one media storage compartment with two pull-outs.


		The home theater cabinetry on the right along with the built-in to the left of the fireplace complete this family room. Both cabinets were fabricated with paint grade materials and finished with a faux process to compliment the styling of the other rooms on the first level of the home. Both cabinet feature lighted display areas at the top of the cabinet. The home theater cabinet sits at an angle to optimize the viewing of the 61" Samsung DLP. The cabinet also houses the components, sub-woofer and left, center, and right speakers. This was the second home theater cabinetry built for this client. the first was the cabinet shown below from their previous home.

Back to the top

Home | About Us | Gallery | The Process | Contact Info


	California License # 793757
	Fine Cabinetry Design & Construction Since 1978